Rohde & Schwarz SMM100A, User Manual

Page: 787 / 1088

Remote control commands
R&S
®
SMM100A
787 User Manual 1179.1341.02 ─ 05
[:SOURce<hw>]:BB:DM:TRIGger[:EXTernal]:INHibit <Inhibit>
Specifies the number of symbols, by which a restart is inhibited.
Maximum trigger delay and trigger inhibit values depend on the installed options. See
"Specifying delay and inhibit values" on page 101.
Parameters:
<Inhibit> integer
Range:
0 to 21.47 * (symbol rate)
*RST: 0
Default unit: symbol
Example: See Example "Adjusting clock, marker and trigger settings"
on page 772.
Manual operation: See "External / Trigger Inhibit" on page 111
Marker settings
[:SOURce<hw>]:BB:DM:TRIGger:OUTPut<ch>:MODE <Mode>
Defines the signal for the selected marker output.
For detailed description of the regular marker modes, refer to "Marker modes"
on page 93.
Parameters:
<Mode> CLISt | PULSe | PATTern | RATio
CLISt
A marker signal that is defined in the selected control list is gen-
erated.
*RST:
RATio
Example: See Example "Adjusting clock, marker and trigger settings"
on page 772
Manual operation: See "Marker Mode" on page 113
[:SOURce<hw>]:BB:DM:TRIGger:OUTPut<ch>:ONTime <OnTime>
[:SOURce<hw>]:BB:DM:TRIGger:OUTPut<ch>:OFFTime <OffTime>
Sets the number of symbols in a period (ON time + OFF time) for marker
RATio
.
Parameters:
<OffTime> integer
Range:
1 to 16777215
*RST: 1
Default unit: symbol
Example: See Example "Adjusting clock, marker and trigger settings"
on page 772
Manual operation: See "Marker Mode" on page 113
SOURce subsystem