Remote control commands
R&S
®
SMM100A
774
User Manual 1179.1341.02 ─ 05
Parameters:
<Standard>
USER | BLUetooth | DECT | ETC | GSM | GSMEdge | NADC |
PDC | PHS | TETRa | W3GPp | TDSCdma | CFORward |
CREVerse | WORLdspace | TFTS | APCOPH1C4fm |
APCOPH1CQpsk | APCOPH2HCpm | APCOPH2HDQpsk |
APCOPH2HD8PSKW | APCOPH2HD8PSKN | APCOPH1Lsm |
APCOPH1Wcqpsk
A query returns the value
USER
if one the following is true:
•
A user-defined custom digital modulation setting was loaded
•
One of the associated settings was changed subsequent to the
selection of a standard.
*RST:
GSM
Example:
See
Example "Performing general tasks"
Manual operation:
See
[:SOURce<hw>]:BB:DM:SOURce
<Source>
Selects the data source.
Parameters:
<Source>
ZERO | ONE | PRBS | PATTern | DLISt
*RST:
PRBS
Example:
See
Example "Performing general tasks"
Manual operation:
See
[:SOURce<hw>]:BB:DM:PATTern
<Pattern>, <BitCount>
Selects the data pattern for the internal data source.
Parameters:
<Pattern>
numeric
*RST:
#H0
<BitCount>
integer
Range:
1 to 64
*RST:
1
Example:
SOURce:BB:DM:SOURce PATT
SOURce:BB:DM:PATTern #B01110111010101010,17
Generates the user-defined sequence of 0/1 data.
Manual operation:
See
[:SOURce<hw>]:BB:DM:PRBS[:LENGth]
<Length>
Defines the length of the pseudo-random sequence in accordance with the following
equation:
SOURce subsystem
