Getting started
R&S
®
SMM100A
73
User Manual 1179.1341.02 ─ 05
3.5.3.1
Status bar
The status bar at the top of the screen indicates the RF frequency and the level of the
output signal provided to the DUT. You can set both parameters directly here.
1
2
3
1 = Frequency display
2 = Status buttons
3 = Level display
The status buttons indicate key parameters that are set for the output signal. Most of
the status buttons are virtual keys you can use to open a corresponding menu or dia-
log.
3.5.3.2
Block diagram
The block diagram shows the current configuration and the signal flow in the generator
with the aid of function blocks, connected by signal lines.
2
1
3
4
5
6
7
8
9
10
12
13
11
Baseband domain, digital
RF domain, analog
1, 10, 12 = Connector icons (RF, analog, digital)
2, 9
= Control signal block
3
= Status indicator
4
= Functional block
5, 7
= Graphics indicator
6
= Signal line (digital)
8
= Signal line (analog)
11, 13
= Stream indicator
Instrument control
