Rohde & Schwarz SMM100A, User Manual

Page: 636 / 1088

Network operation and remote control
R&S
®
SMM100A
636 User Manual 1179.1341.02 ─ 05
You can directly use this format with MATLAB(c) Toolkit. For comprehensive infor-
mation on this topic, refer to the application note
1GP60: MATLAB Toolkit for R&S
Signal Generators .
●
NICVI
An ANSI C programming environment designed for measurements and tests (
*.c
).
You can directly use this format with National Instruments LabWindows CVI.
●
Python3
A general-purpose and high-level programming language (
*.py
).
You can also convert a script to a user-specific format. In this case, you need a code
template with the extension
*.expcodetmpl
.
For information on how to select the code template and save the script in a file, see
Chapter 12.9.3, "SCPI recording export settings" , on page 637.
Executing a SCPI script
A SCPI script primarily runs on the controller PC. In addition, you can execute a script
directly on the instrument, by assigning the script to the [
★
(User)] key.
See Chapter 11.3.4, "How to assign actions to the [
★
(User)] key" , on page 547.
12.9.1 Show SCPI command
Access:
1. Select the parameter.
2. Open the context-sensitive menu (tap and hold).
3. Select "Show SCPI Command".
This function provides the syntax of the remote command with the current setting.
Copy
Copies the command and the current setting.
Close
Exits the "SCPI Command" dialog.
12.9.2 Displaying an SCPI list
The instrument displays a recorded SCPI list and thus provides viewing the recorded
results before exporting.
► Depending on the starting point, you can access the "SCPI Recording List" dialog
as follows:
● During recording
Select "Show SCPI Recording List" in the context-sensitive menu.
Automating tasks with remote command scripts