manualshive.com logo in svg

Rohde & Schwarz SMM100A, User Manual

Share
Download
Rohde & Schwarz SMM100A User Manual Download Page 546

General instrument functions

R&S

®

SMM100A

546

User Manual 1179.1341.02 ─ 05

3. To tansfer a file from or to an instrument, the R&S

 

SMM100A provides several

options, see 

"File handling"

 

on page 485.

11.3.3

 

Define user key actions settings

Access:

► Select "System Configuration > Setup > User Interface > Define User Key".

The dialog displays a list of the currently enabled actions and provides functions to
define new, edit or remove existing actions. If no actions have been defined, the list
is empty.
See 

Chapter 11.3.4, "How to assign actions to the [

★

 (User)] key"

, 

on page 547.

The remote commands required to define these settings are described in 

Chapter 13.9,

"DISPlay subsystem"

, 

on page 684.

Name

Enters a user-defined name for the action.

Wizard

Defines the action to be executed.

"Load SCPI Script"

Selecting the action load and executes the SCPI script.

"Recall Setup"

Load a setup for quick access to the user-defined settings.

Organizing frequently used settings as favorites

Summary of Contents for SMM100A

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands