Rohde & Schwarz SMM100A, User Manual

Page: 351 / 1088

Configuring the RF signal
R&S
®
SMM100A
351 User Manual 1179.1341.02 ─ 05
"Column Separator"
Sets the separator between the columns in an ASCII table.
Available are: "Tab", "Semicolon", "Comma" or "Space".
Remote command:
[:SOURce<hw>]:LIST:DEXChange:AFILe:EXTension
on page 926
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:DECimal
on page 926
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:COLumn
on page 926
[:SOURce<hw>]:CORRection:DEXChange:AFILe:EXTension
on page 881
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:DECimal
on page 882
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:COLumn
on page 882
Select (ASCII) Source/Select (ASCII) Destination
In "Mode > Import", access the file select dialog that provides standard file handling
functions.
Where:
●
"Select ASCII Source": defines the file to be loaded (imported)
●
"Select ASCII Destination": selects the filename under that the loaded file is saved
Remote command:
[:SOURce<hw>]:LIST:DEXChange:AFILe:CATalog?
on page 925
[:SOURce<hw>]:LIST:DEXChange:AFILe:SELect
on page 926
[:SOURce<hw>]:CORRection:DEXChange:AFILe:CATalog?
on page 881
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SELect
on page 882
Select Source/Select ASCII Destination
In "Mode > Export", access the file select dialog that provides standard file handling
functions.
Where:
●
"Select Source": selects the file to be exported
●
"Select ASCII Destination": defines the filename and the file path for the exported
file
Remote command:
[:SOURce<hw>]:LIST:DEXChange:SELect
on page 927
[:SOURce<hw>]:CORRection:DEXChange:SELect
on page 883
Import / Export
Imports or exports the selected data list file, depending on the current mode.
Remote command:
[:SOURce<hw>]:LIST:DEXChange:EXECute
on page 926
[:SOURce<hw>]:CORRection:DEXChange:EXECute
on page 882
7.10.7 List editor
The "User Correction" and "List Mode" dialogs provide a build-in list editor for defining
the corresponding value pairs.
Varying the RF signal in list or sweep mode