manualshive.com logo in svg

Rohde & Schwarz SMM100A, User Manual

Share
Download
Rohde & Schwarz SMM100A User Manual Download Page 1007

Troubleshooting and notifications

R&S

®

SMM100A

1007

User Manual 1179.1341.02 ─ 05

You can download firmware updates and the "Release Notes" that describe the modifi-
cations and the firmware update procedure.
See 

www.rohde-schwarz.com/firmware/smm100a

Remote command: 
n.a.

Downgrade Info

Shows downgrade information, like factory firmware version and minimum firmware
version to that the instrument can be downgraded.

Remote command: 
n.a.

Show Open Source Acknowledgments

Accesses the list of the used open-source software packages and the corresponding
verbatim license texts.

LucasFonts RSCorpid EULA

Accesses copyright information on LucasFonts font type RSCorpid EULA.

Hardware Options/Software Options

The tables in the "Hardware" and "Software" tabs list the installed hardware and soft-
ware options.

"Option"

Short name of option

"Designation"

Name of option

"Licenses"

(optional)
Number of licenses.

"Expiration Date"

For regular options, "Permanent" is indicated in this column. Some
options are available as trial versions. This column shows their expi-
ration date. After this date, the option is no longer available on the
instrument.

Remote command: 

*OPT?

 

on page 656

*IDN?

 

on page 655

Versions

The "Versions" tab shows the versions of the technical specification of the
R&S

 

SMM100A and of the software components that comprise the firmware.

"Package"

Name of the component.

"Version"

Current issue of the component.
E.g. the data sheet covers the technical data of the hardware compo-
nents of the factory settings.
See also 

Chapter 12.6.2.4, "Datasheet"

, 

on page 618.

Remote command: 

:SYSTem:SPECification:VERSion:FACTory?

 

on page 981

Requesting instrument configuration and specifications

Summary of Contents for SMM100A

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands