Remote Control Commands
R&S
®
SMF100A
413
Operating Manual 1167.2319.02 ─ 12
:SENSe[:POWer]:SWEep:HCOPy:FILE[:NAME]
<Name>
Creates of selects a file for storing the hardcopy after the
SENS:SWE:HCOP:EXEC
command is sent. The directory is either defined with the command
MMEMory:CDIR
or
the path is specified together with the file name. Access to the file via remote control is
possible using the commands of the MMEM-Subsystem. In contrast, command
SENSe:SWEep:HCOPy:DATA?
transfers the hardcopy contents directly to the remote
client where they can be further processed.
Parameters:
<Name>
string
Example:
SENS:SWE:HCOP:DEV:LANG BMP
selects output format
*,bmp
.
SENS:SWE:HCOP:FILE:AUTO:STAT OFF
switches off automatic naming.
SENS:SWE:HCOP:FILE 'var/trace/nrp_trace1'
creates the file
nrp_trace1.bmp
in the trace directory.
SENS:SWE:HCOP:EXEC
triggers the generation of a hardcopy of the current trace. The
hardcopy is stored in the file
nrp_trace1.bmp
.
Options:
Option R&S SMF-K28
Manual operation:
See
" File name - Power Analysis "
:SENSe[:POWer]:SWEep:HCOPy:FILE[:NAME]:AUTO:DIRectory
<Directory>
Defines the directory into which the hardcopy files will be stored if auto naming is acti-
vated (
SENS:SWE:HCOP:FILE:AUTO:STAT ON
).
Parameters:
<Directory>
string
Example:
SENS:SWE:HCOP:FILE:AUTO:DIR 'var/nrp'
hardcopy file are stored in directory
var/nrp
if automatic nam-
ing is activated.
Options:
Option R&S SMF-K28
Manual operation:
See
" Save Options - Power Analysis "
:SENSe[:POWer]:SWEep:HCOPy:FILE[:NAME]:AUTO:DIRectory:CLEar
Deletes all files with extensions
bmp
,
img
,
png
,
xpm
and
csv
in the directory set for
automatic naming.
Example:
SENS:SWE:HCOP:FILE:AUTO:DIR 'var/nrp'
hardcopy file are stored in directory
var/nrp
if automatic nam-
ing is activated.
SENS:SWE:HCOP:FILEAUTO:DIR:CLE
deletes all hardcopy file that are stored in directory
var/nrp
.
Power Sensor Measurement Subsystems
