Rohde & Schwarz SMF-B1, Operating Manual

Page: 385 / 653

Remote Control Commands
R&S
®
SMF100A
370 Operating Manual 1167.2319.02 ─ 12
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer?
Queries the number in the automatic filename. The number is assigned in such a way
that always the lowest possible value for a unique filename within the selected path is
used.
On initially switching on the device, the number is reset to the lowest possible value.
Starting with number 0 the output directory is scanned for existing files. As long as files
with the same name are existing, the number is incremented by 1. The number is auto-
matically set to a number so that the resulting filename is unique within the selected
path. The current number is not saved in the save recall file but is temporarily stored
within the database. On subsequent saves, the number is incremented.
Return values:
<Number> integer
Range:
0 to 999999
*RST: 0
Example: HCOP:FILE:AUTO:NUMB?
Queries the number in the automatic filename.
Usage: Query only
Manual operation: See " File Options " on page 136
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix <Prefix>
Sets the prefix part in the automatic filename. The usage of the prefix is activated with
command
HCOP:FILE:AUTO:PREF:STAT ON
.
Parameters:
<Prefix> string
*RST:
HCopy
Example: HCOP:FILE:AUTO:PREF 'Snapshot'
Appends
"Snapshot"
as prefix to the generated filename.
Manual operation: See " File Options " on page 136
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe <State>
Activates the usage of the prefix in the automatic filename. The prefix is entered with
command
HCOP:FILE:AUTO:PREF
.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
1
Example: HCOP:FILE:AUTO:PREF:STAT OFF
Deactivates the usage of the prefix in the automatic filename.
Manual operation: See " File Options " on page 136
HCOPy Subsystem