Error Messages
R&S
®
SMC100A
330
Operating Manual 1411.4060.32 ─ 04
Error
Code
Error
Description
Remedy
201
Hardware revision out
of date
A later version of certain parts of the
instrument is necessary to execute the
function selected.
The driver does not support the
installed version of a module.
202
Cannot access the
EEPROM
A error occurs when writing or reading
a EEPROM.
The EEPROM might be defect
and has to be replaced.
203
Invalid EEPROM data
Reading a EEPROM is possible, how-
ever the data are inconsistent.
204
Driver initialization
failed
Initialization of a driver fails when boot-
ing the instrument firmware.
The driver is not compatible with
the hardware or software configu-
ration of the instrument.
241
No current list
There is no list selected. To execute
the required operation, a list has to be
selected in the related menu.
If no list is available, a new list
must be created.
242
Unknown list type
specified
The list type selected is not valid for the
required operation.
For instance, the file extension for
waveform list files is *.wv. It is not pos-
sible to enter another file extension
when selecting a list.
Check the selected list type.
460
Cannot open file
The selected file can not be opened.
Check the path and file name.
461
Cannot write file
The file can not be written.
Check if the file is read-only.
462
Cannot read file
The file can not be read.
Check if the file contents are com-
patible with the file type.
463
Filename missing
The required operation cannot be exe-
cuted because the file name is not
specified.
A file name has to be entered
when creating a new list.
464
Invalid filename exten-
sion
The file extension is not valid for the
required operation.
Check the file extension.
For instance, the file extension for
waveform list files is
*.wv
. It is not
possible to enter another file
extension when storing a list.
465
File contains invalid
data
The selected file contains data that is
not valid for the file type.
The file extension determines the data
that is valid for this file type. If the file
extension is changed the lists are no
longer recognized and the data are
therefore invalid.
Example: the extension of a waveform
file (=
*.wv
) was changed to
*.txt
Check the file extension.
Device-Specific Error Messages
