Remote Control Commands
R&S
®
SMC100A
242
Operating Manual 1411.4060.32 ─ 04
Example:
SENS:ZERO
activates autozero function.
Usage:
Event
SENSe<ch>:UNIT[:POWer]
<Power>
The command selects the unit used for result query with command READ. The power
sensor provides the measured value in Watt. In which unit the measured value is returned
is selected here and might be either Watt, dBm or dBuV.
Parameters:
<Power>
DBM | DBUV | WATT
*RST:
DBM
Example:
SENS2:UNIT DBM
selects unit dBm for the measured value returned by command
READ
.
READ2?
Response: 7.34
7.34 dBm are measured by sensor 2.
7.12 SOURce Subsystem
The
SOURce
subsystem contains the commands for configuring the digital and analog
signals.
SOURce<hw>
For one-path instruments, the keyword
SOURce
is optional and can be omitted.
.......................................................................................243
........................................................................245
.......................................................................................253
.........................................................................255
...................................................................................262
.............................................................................262
.........................................................................270
..................................................................................270
................................................................................271
.......................................................................................272
................................................................................274
..................................................................................283
.........................................................................287
................................................................................290
SOURce Subsystem