Remote Control Commands
R&S
®
SMC100A
231
Operating Manual 1411.4060.32 ─ 04
MMEMory:MOVE
file_source,msus_source[, file_destination, msus_destination]
Setting parameters:
<file_source>
String parameter to specify the name of the file to be moved.
<file_destination>
String parameters to specify the name of the new file.
Example:
See
"Working with Files and Directories"
Usage:
Setting only
SCPI confirmed
:MMEMory:MSIS
<Msis>
The command is without effect for the Linux operating system.
Usage:
SCPI confirmed
:MMEMory:RDIRectory
<Rdirectory>
Removes an existing directory from the mass memory storage system. If no directory is
specified, the subdirectory with the specified name is deleted in the default directory.
Setting parameters:
<Rdirectory>
string
String parameter to specify the directory to be deleted.
Example:
See
"Working with Files and Directories"
Usage:
Setting only
:MMEMory:STORe:STATe
<sav_rcl_state_number>, <file_name>
Stores the current instrument setting in the specified file.
The instrument setting must first be stored in an internal memory with the same number
using the common command
*SAV
.
Setting parameters:
<sav_rcl_state_number>
Corresponds to the specific <number> defined with the
*SAV
command, e.g.
*SAV 4
.
<file_name>
String parameter to specify the file name with extension
*.savrcltxt
.
Example:
See
"Storing and Loading Current Settings"
Usage:
Event
MMEMory Subsystem
