Remote Control Commands
R&S
®
SMC100A
220
Operating Manual 1411.4060.32 ─ 04
Return values:
<File>
string
Example:
HCOP:DEV:LANG BMP
selects output format *.bmp.
HCOP:FILE:AUTO:DIR '/usb/HCopy'
defines the destination directory '/usb/HCopy'
HCOP:FILE:AUTO:PREF 'gen'
the file name starts with the prefix 'gen'. The usage of automatic
naming with prefix and date in the file name is preset (
…:STAT
ON
).
HCOP
triggers the generation of a hardcopy of the current trace.
HCOP:FILE:AUTO:FILE?
queries the file name
Response: 'gen101012008001.bmp'
Usage:
Query only
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY?
The command returns the day of the current system date which will be used in the file
name if automatic naming is activated.
Return values:
<Day>
float
Example:
HCOP:FILE:AUTO:DAY?
returns the day in the date part of the automatic file name.
Usage:
Query only
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe
<State>
This command activates the usage of the day in the automatic file name.
Parameters:
<State>
0 | 1 | OFF | ON
*RST:
ON
Example:
HCOP:FILE:AUTO:DAY:STAT OFF
deactivates the use of the day in the automatically generated file
name.
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh?
This command queries the month in the date part in the automatic file name.
Return values:
<Month>
float
Example:
HCOP:FILE:AUTO:MONT?
queries the month in the date part in the automatic file name.
HCOPy Subsystem
