Rohde & Schwarz SMBV100B, User Manual

Page: 759 / 1030

Remote Control Commands
R&S
®
SMBV100B
757 User Manual 1178.4460.02 ─ 03
Manual operation: See "Save List/Save List As..." on page 201
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CLOad <FilenameInput>
Creates a multi-segment waveform using the current entries of the specified configura-
tion file (
*.inf_mswv
).
The ARB generator is activated, the new multi-segment waveform (
*.wv
) is loaded
and the first segment is output in accordance to the trigger settings.
Setting parameters:
<FilenameInput> string
Absolute file path, file name of the configuration file and file
extension (
*.inf_mswv
)
Example: See Example "Creating a multi-segment waveform" on page 740
Usage: Setting only
Manual operation: See "Save List/Save List As..." on page 201
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:MARKer:MODE <Mode>
Defines the way the marker information within the separate segments is processed.
Parameters:
<Mode> IGNore | TAKE
*RST:
TAKE
Example: see Example "Adding extra marker signals" on page 743
Manual operation: See "Segment Marker" on page 206
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:MARKer:ESEGment
<Mode>
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:MARKer:FSEGment
<Mode>
Enables/disables the generation of an additional marker restart signal at the beginning
of the first segment (
FSEGment
) or at the beginning of each segment (
ESEGment
).
If additional marker generation is enabled, the existing marker signals in the individual
segment waveform files are not considered.
Parameters:
<Mode> OFF | MRK1 | MRK2 | MRK3 | MRK4
*RST:
OFF
Example: see Example "Adding extra marker signals" on page 743
Manual operation: See "Sequence Restart" on page 206
SOURce Subsystem