manualshive.com logo in svg

Rohde & Schwarz SMBV100A, Operating Manual

Share
Download
Rohde & Schwarz SMBV100A Operating Manual Download Page 91

Manual Operation

R&S

®

SMBV100A

76

Operating Manual 1176.8016.02 ─ 17

4 Manual Operation

The R&S

 

SMBV can be operated intuitively either via the interactive block diagram or

via a menu tree. All menus are in the form of windows that can be operated in the
same way. Rotary knob, keys and softkeys, or alternatively a mouse, allow direct and
therefore convenient access to entries and settings.

The clear-cut display shows the current signal generator state. Graphs, spectra, vector
diagrams, etc. can be called for a visual check of the output signal. Numerous help
functions support the user in signal configuration.

This section describes the concept of manual operation of the signal generator. This
includes a description of the general structure of a dialog box, working with dialog
boxes and the block diagram and the setting of parameters.

For an in-depth description of the dialog boxes and the instrument functions refer to
section "Instrument Functions" in the Operating Manual.

4.1 Key Features

The manual operating concept of the R&S

 

SMBV enables the user to make settings as

intuitively as possible and at the same time gives a permanent overview of characteris-
tics of the generated signal and of the current instrument state. Numerous online help
functions support user settings.

Block diagram

The block diagram is the core of the operating concept.

A graphics display shows the current configuration and the signal flow in the form of a
block diagram. All graphical elements can be accessed for operation. An element is
selected by means of the arrow keys and the associated setting function is called by
pressing Enter. Required menus and graphs are displayed on the block diagram which
is displayed again in the foreground whenever the DIAGRAM (CTRL+D) key is
pressed.

Permanent frequency and level display

The main characteristics of the RF signal, frequency and level, are permanently dis-
played in the header section of the screen and can be directly set in the display fields
after the FREQ (CTRL+F) or LEVEL (CTRL+L) key is pressed. Status messages for
the output signal are displayed in addition to frequency and level.

Operation via Graphical User Interface

●

Functional blocks

 

 

Key Features

Summary of Contents for SMBV100A
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands