manualshive.com logo in svg

Rohde & Schwarz SMBV100A, Operating Manual

Share
Download
Rohde & Schwarz SMBV100A Operating Manual Download Page 693

Remote Control Commands

R&S

®

SMBV100A

678

Operating Manual 1176.8016.02 ─ 17

[:SOURce<hw>]:BB:DM:CLISt:DELete 

<Filename>

The command deletes the specified control list from the default directory. The default
directory is set using command 

MMEM:CDIRectory

. A path can also be specified, in

which case the files in the specified directory are deleted. The file extension may be
omitted. Only files with the file extension 

*.dm_iqc

 will be deleted.

Setting parameters: 

<Filename>

<list name>

Example: 

BB:DM:CLIS:DEL 'c_list3'

deletes control list c_list3.

Usage: 

Setting only

Manual operation: 

See 

"File Manager"

 

on page 363

[:SOURce<hw>]:BB:DM:CLISt:POINts?

The command queries the number of lines (2 bytes) in the currently selected list.

Return values: 

<Points>

integer
Range: 

0  to  INT_MAX

*RST: 

0

Example: 

BB:DM:CLIS:SEL "c_list1"

selects control list c_list1.

BB:DM:CLIS:POIN?

queries the number of lines in the control list.
Response: 

20

the control list consists of 20 lines.

Usage: 

Query only

[:SOURce<hw>]:BB:DM:CLISt:SELect 

<Filename>

The command selects the control list in the default directory. The default directory is
set using command 

MMEM:CDIRectory

. A path can also be specified, in which case

the files in the specified directory are selected. If a control list with the specified name
does not yet exist, it is created. The file extension may be omitted. Only files with the
file extension 

*.dm_iqc

 will be selected or created.

Parameters:

<Filename>

<list name>

Example: 

BB:DM:CLIS:SEL 'c_list1'

selects control list 

c_list1

.

Manual operation: 

See 

"Functions for handling of control lists"

 

on page 166

SOURce Subsystem

Summary of Contents for SMBV100A
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands