manualshive.com logo in svg

Rohde & Schwarz SMBV100A, Manual

Share
Download
Rohde & Schwarz SMBV100A Manual Download Page 489

Remote Control Commands

R&S

®

SMBV100A

472

Operating Manual 1407.6062.32 ─ 08

:KBOard:LANGuage 

<Language>

This command selects the keyboard language. The assignment of some keys depends
on the selected language.

Parameters:

<Language>

US | DE
*RST: 

US

Example: 

KBO:LANG US

selects keyboard language American English.

Usage: 

SCPI confirmed

:KBOard:LAYout?

This command selects the keyboard language. The assignment of some keys depends
on the selected language.

Return values: 

<Layout>

CHINese | DANish | DUTCh | ENGUK | ENGUS | FINNish |
FRENch | FREBe | FRECa | GERMan | ITALian | JAPanese |
KORean | NORWegian | PORTuguese | RUSSian | SPANish |
SWEDish
*RST: 

US

Example: 

KBO:LAY US

activates American keyboard layout.

Usage: 

Query only
SCPI confirmed

7.11 MMEMory Subsystem

The MMEMory subsystem (

M

ass 

Mem

ory) contains the commands for managing files

and directories as well as for loading and storing complete instrument settings in files.

The files are stored on the internal flash card of the instrument. The 

/var

 directory can

be used to save user-defined data; any subdirectory structure can be created on 

/var

.

Some default subdirectories are predefined, but can be changed at any time.

The default directory is determined using the command 

MMEMory:CDIR

.

The 

/opt

 directory is a protected and therefore unaccessible system directory. The files

on this directory contain data that must not be changed. Therefore, this directory should
not be accessed, since reconstruction of the system partition will lead to data loss.

 

MMEMory Subsystem

Summary of Contents for SMBV100A













































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands