Instrument Function
R&S
®
SMBV100A
347
Operating Manual 1407.6062.32 ─ 08
The resulting clock rate must not exceed the maximum ARB clock rate (see data sheet).
The number of sample values is automatically restricted by reference to the set fre-
quency.
SCPI command:
Amplitude (Rect Test Signal)
Enters the digital amplitude of the rectangular wave.
The abbreviation FS means full scale.
SCPI command:
Offset DC (Rect Test Signal)
Enters a DC component.
SCPI command:
Generate Signal HD (Rect Test Signal)
Generates a signal and saves it to a file.
The File Select window opens automatically and the signal can be stored as a waveform
file.
SCPI command:
Generate Signal RAM (Rect Test Signal)
Generates a signal and uses it as output straight away.
SCPI command:
Const IQ Test Signal
To access the "Sine Test Signals" dialog, in the "ARB MOD" dialog set the parameter
"Create Test Signal" to Const I/Q and press "Create Test Signal".
The dialog can be used to configure a continuous test signal with constant IQ. The I and
Q values for each path are adjustable but constant. The I and Q values are entered as a
decimal number, which is decimal-to-binary converted internally. The signal is provided
as a 16-bit wide digital signal for both I and Q channels.
Converted to analog the signal is output directly at the BNC connectors I and Q outputs
of the instrument.
Baseband Signal - Baseband Block
Summary of Contents for SMBV100A
Page 31: ......
