Rohde & Schwarz SMBV-P101, User Manual, Page: 73 / 131

Remote-Control Commands
R&S
®
SMBV-P101
58 User Manual 1176.9787.02 ─ 05
6 Remote-Control Commands
The following commands are required to perform signal generation with the satellite
navigation options in a remote environment. We assume that the R&S
SMBV has
already been set up for remote operation in a network as described in the R&S SMBV
documentation. A knowlage about the remote control operation and the SCPI com-
mand syntax are assumed.
Conventions used in SCPI command descriptions
For a description of the conventions used in the remote command descriptions, see
section "Remote Control Commands" in the R&S
SMBV operating manual.
Placeholder <GNSS>
The placeholder
<GNSS>
is introduced to simplify the description of group of com-
mands with similar syntax. Depending on the navigation standard to be controlled,
replace this placeholder
<GNSS>
with
GPS
,
GALileo
,
GLONass
or
BEIDou
.
Example:
SCPI command:
[SOURce<hw>]:BB:GNPR:NAVigation:ALManac:<GNSS>:FILE
●
To set the almanac of a GPS satellite, replace the placeholder
<GNSS>
with
GPS
.
Correct command syntax
SOURce:BB:GNPR:NAVigation:ALManac:GPS:FILE
.
●
invalid command
SOURce:BB:GNPR:NAVigation:ALManac:<GNSS>:FILE
Common Suffixes
The following common suffixes are used in remote commands:
Suffix Value range Description
SOURce<hw> 1 available baseband signals
OUTPut<ch> 1 .. 2 available markers
EXTernal<ch> 1 external trigger connector
SVID<ch> 1 .. 32 for GPS satellites
1 .. 50 for Galileo satellite
1 .. 24 for GLONASS satellites
1 .. 37 for BeiDou satellites
available SV IDs
If almanacs are used, the SV ID must correspond to
a healthy satellie!
Satellite<st> 1 .. 4 available satellites
The following commands specific to the satellite standards are described here:
● Primary Settings ......................................................................................................59
● Navigation Data .......................................................................................................61
● Almanac Configuration ............................................................................................64