manualshive.com logo in svg

Rohde & Schwarz SMB100A, Quick Start Manual

Share
Download
Rohde & Schwarz SMB100A Quick Start Manual Download Page 64

Instrument Control

R&S

®

SMB100A

64

Quick Start Guide 1407.0812.62 ─ 20

Key of PC keyboard

Short description

Function

ESC

ESC

Selects the next higher menu/selection
level. When the editing mode is exited with
ESC, the previous value is restored.

F1

Help

Opens/closes context-sensitive help.

Ins

Insert

Activates the insert mode.

8.1.1.1

 

Front Panel Key Emulation

The R&S

 

SMB provides a front panel key emulation to enable execution of the front

panel key functions by mouse e.g. for remote access. The emulation is called on the
external monitor by a right mouse click. The front panel key functions are executed by
a mouse click on the associated button.

8.1.1.2

 

On-screen Keyboard

In addition, the Windows XP operating system provides a keyboard emulation that can
be used for system settings if no external keyboard but a mouse is available.

To access the on-Screen Keyboard, select "Start > Programs > Accessories > Accessi-
bility > On-Screen Keyboard".

Manual Operation

Summary of Contents for SMB100A





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands