Rohde & Schwarz SMB100A, Quick Start Manual

Page: 44 / 92

Instrument Tour
R&S
®
SMB100A
44 Quick Start Guide 1407.0812.62 ─ 20
[SETUP]
Opens the "Setup" dialog for configuring presettings.
[File]
Activates the menu for storing or loading files (see Chapter 8.1.8, "File Management" ,
on page 83).
INFO
Displays status messages, error messages and warnings.
[WINBAR]
Toggles between the diagram and active menus.
[HELP]
Displays context-sensitive help text.
5.1.2 Standby LEDs and Standby Key
The standby LEDs and the [ON/STANDBY] key are located in the bottom left corner of
the front panel.
The [ON/STANDBY] key toggles the instrument between standby and ready state (indi-
cated by the standby LEDs).
The standby LEDs indicate the instrument states as follow:
●
the green LED (left) is on when the instrument is ready for operation,
●
the yellow LED (right) is on in the standby mode.
See Table 4-1 .
5.1.3 Display
The display clearly shows all main settings and signal generator states.
The display is divided into the following sections:
●
Frequency and level display with info line
–
Frequency and level settings containing offset.
– Status messages
– Brief error messages.
To access an window with detailed information for a message, use the [INFO]
key.
●
Block diagram
The block diagram shows the current configuration and the signal flow in the gen-
erator with the aid of function blocks containing an on/off switch. Selecting a func-
tion block opens a list of associated setting menus. Active menus, info windows
and graphs are displayed on top of the block diagram. The block diagram can be
displayed in the foreground anytime with the
[DIAGRAM] key.
Front Panel Tour