Generator R&S
UP300/350
E-1147.2759.00
6-210
Operating Manual, 11/2007
Activating/Deactivating the Audio Monitoring Output
Use
At the audio monitoring output [15], you can use headphones or scope to
monitor signals which can be tapped at various points in the R&S UP300/350.
To do so, you must first switch on the audio monitoring output.
Note:
The setting is always valid for both channels (Ch 1&2).
Activating the audio
monitoring output
1.
Press the
function key
in the
menu.
The function key is
highlighted
. The new setting is stored and displayed
in the parameter field.
After you switch on the audio monitoring output, the generator signal is
applied at the output [8].
Deactivating the
audio monitoring
output
2.
Press the
function key
in the
menu.
The function key is
no longer highlighted
. The new setting is stored
and displayed in the parameter field.
Summary of Contents for Smart Instruments UP300
Page 1: ...11 2007...
Page 20: ...R S UP300 350 E 1147 2759 00 1 20 Operating Manual 11 2007...
Page 30: ......
