Rohde & Schwarz SGU100A User Manual Download Page 65

Page: 65 / 236

Understanding the R&S SGMA-GUI Software

R&S

SGU100A

User Manual 1176.7726.02 ─ 09

The "Available Instruments" in the

Configure Instruments

dialog lists all instruments

configured in the software.

2. Select the newly configured/connected or deactivated instrument and set "Active >

On" to activate it.

Tip:

Only active instruments are displayed in the R&S

SGMA-GUI main panel!

6.4.2.5

How to Edit Instruments

1. In the R&S

SGMA-GUI main panel, select "Setup > Instruments".

The

Configure Instruments

dialog opens and lists the "Available Instruments".

2. Select the instrument to be edited and click the "Edit" button.

The

Edit Instrument

dialog opens.

3. Change the settings and confirm with OK.

The edited settings are applied.

6.4.2.6

How to Delete an Instrument

1. In the R&S

SGMA-GUI main panel, select "Setup > Instruments".

The

Configure Instruments

dialog opens.

2. Select the instrument to be deleted and click the "Delete" button.

The selected instrument is deleted from the list of "Available Instruments".

6.4.2.7

How to Delete All Instruments

1. In the R&S

SGMA-GUI main panel, select "Setup > Instruments".

The

Configure Instruments

dialog opens.

2. Click the "Clear" button.

All instruments are deleted from the list of "Available Instruments".

6.4.2.8

How to Reserve the Instrument for Control

1. Open the "SGMA-GUI > Setup > Instruments > Configure Instruments" dialog,

select the instrument in the list of "Available Instruments" and select "Edit".

2. In the "Edit Instrument" dialog, enable "Exclusive Access".

Working with R&S SGMA-GUI

Summary of Contents for SGU100A













































































































































































































































Search results

Summary of Contents for SGU100A

Reviews:

Rohde & Schwarz SGU100A, User Manual, Page: 65 / 236

Search results

Summary of Contents for SGU100A

Reviews: