Rohde & Schwarz SGU100A User Manual Download Page 58 | Manualshive

Page: 58 / 236

Rohde & Schwarz SGU100A User Manual Download Page 58

Understanding the R&S SGMA-GUI Software

R&S

®

SGU100A

56

User Manual 1176.7726.02 ─ 09

Remote command:

:SYSTem:COMMunicate:SOCKet:PORT

6.1.3

Help

The R&S SGMA-GUI is equipped with a context-sensitive help function. A help page
can be called any time during software operation.

The context-sensitive page which is opened with the [F1] button is part of a compre-
hensive help system.

It is possible to move from this context-sensitive page to any page of the help system.
An overview of the contents of the online help can be reached via the menu "SGMA-
GUI > Help > Contents".

A search for keywords within the help function is available via menu item "SGMA-GUI
> Help > Index".

6.2

Info Dialog and Messages in the Info Bar

A few operating states and the current messages are displayed in the info line. For
information on messages in greater detail and their management, an "Info" dialog can
be opened.

6.2.1

Info Dialog

The "Info" dialog provides a list of currently active permanent messages and a detailed
description of each message. The messages are color-coded according to their level.

Accessing the info dialog

► In the "R&S SGMA-GUI main panel", select the "Info" button.

The "Info" dialog opens.

Info Dialog and Messages in the Info Bar

«
...
56
57
58
59
60
...
»

Summary of Contents for SGU100A













































































































































































































































Reviews:

No comments