General Instrument Settings and Instrument Setup
R&S
®
SGU100A
98
User Manual 1176.7726.02 ─ 09
Risk of network errors!
Connection errors can affect the entire network.
If your network does not support DHCP, or if you choose to disable dynamic TCP/IP
configuration, you must assign valid address information before connecting the instru-
ment to the LAN.
Contact your network administrator to obtain a valid IP address.
► To access this dialog, select "SGMA-GUI > Instrument Name > Setup > Network
Settings".
The dialog provides access to the network settings, like settings about the general net-
work environment and specific identification of the computer in the network. The dialog
also displays an indication whether the instrument is connected to the network or not.
Restart Network
Shuts down the network connection of the instrument and then re-establishes the con-
nection.
This function can be used to resolve network problems.
Note:
Only the connection of the instrument to the network restarts, the network itself
is not affected.
Hostname
Displays the individual computer name of the instrument.
Network Settings