Rohde & Schwarz RTM20 Series, User Manual, Page: 476 / 499

Remote Control
R&S
®
RTM20xx
461 User Manual 1317.4726.02 ─ 01
3.052000e-06,6,1.293984e-04,0,WIDTH,POSITIVE,9.176800e-06,7,1.477228e-04,0,
WIDTH,POSITIVE,3.052000e-06,8,1.623224e-04,0,WIDTH,POSITIVE,3.102000e-06,9,
1.684724e-04,0,WIDTH,POSITIVE,1.215160e-05,10,1.953216e-04,0,WIDTH,POSITIVE,
3.027200e-06,11,2.044716e-04,0,WIDTH,POSITIVE,6.052000e-06,12,2.252212e-04,0,
WIDTH,POSITIVE,3.052000e-06,13,2.435456e-04,0,WIDTH,POSITIVE,3.027200e-06,14,
2.496456e-04,0,WIDTH,POSITIVE,6.702000e-06
15.3.3 Data and File Management
15.3.3.1 Saving Screenshots to File
Save two display images in png format to the
PIX
folder on a USB flash drive that is
connected to the front panel. One screenshot is colored and the other is grayscaled.
Finally, the data of the gray screenshot is read for further user on the control computer.
Command description in:
​
chapter 15.2.15.1, "Screenshots" , on page 441.
*RST
MMEM:CDIR "/USB_FRONT"
MMEM:MDIR "/USB_FRONT/PIX"
MMEM:CDIR "/USB_FRONT/PIX/"
HCOP:DEST "MMEM"
HCOP:LANG PNG
HCOP:COL:SCH COL
MMEM:NAME "COLORED"
HCOP:IMM
HCOP:COL:SCH GRAY
MMEM:NAME "GRAY"
HCOP:IMM
MMEM:CAT? "*.PNG"
MMEM:DATA? "GRAY.PNG"
15.3.3.2 Saving, Copying, and Loading Setup Data
Save instrument settings to a file on internal storage device, duplicate this file and save
it to a USB stick attached to the front panel. Finally, there are three setup files on the
internal storage
/INT/SETTINGS
, and one file on the USB flash device.
Command description in:
​
chapter 15.2.15.2, "Saving and Loading Data: MMEMory Com-
mands" , on page 443.
CHAN1:STAT ON // Turn channel 1 on
CHAN2:STAT ON // Turn channel 2 on
TIM:ZOOM:STAT ON // Show zoom diagram
MMEM:CDIR "/INT/SETTINGS" // Set storage device and directory
MMEM:STOR:STAT 1,"ZOOM_A.SET" // Save settings to internal storage
MMEM:CAT? "*.SET" // Check
Programming Examples