manualshive.com logo in svg

Rohde & Schwarz RTM20 Series, User Manual, Page: 451 / 499

Share
Download
Rohde & Schwarz RTM20 Series User Manual Download Page 451

Remote Control

R&S

®

RTM20xx

436

User Manual 1317.4726.02 ─ 01

Suffix: 

<m>

.

0..15
Number of the digital channel.
Channel groups: 0..3; 4..7; 8..11; 12..15

Parameters:

<ThresholdLevel>

*RST: 

1.4

Default unit: V

DIGital<m>:THCoupling

Applies the last defined threshold and hysteresis values to all digital channels.

Suffix: 

<m>

.

0..15
Number of the digital channel

Parameters:

<ThresholdCoupling> ON | OFF

DIGital<m>:Hysteresis

Defines the size of the hysteresis to avoid the change of signal states due to noise. The
setting applied to the channel group to which the indicated digital channel belongs.

Suffix: 

<m>

.

0..15
Number of the digital channel.
Channel groups: 0..3; 4..7; 8..11; 12..15

Parameters:

<Hysteresis>

MAXimum | ROBust | NORMal

DIGital<m>:LABel 

<Label>

Defines a label for the indicated digital channel.

Suffix: 

<m>

.

0..15
Number of the digital channel

Parameters:

<Label>

String value
String parameter

Example: 

DIGital4:LABel "Data"

Defines the label "Data" dor digital channel D4.

DIGital<m>:POSition 

<Position>

Sets the vertical position of the indicated vertical channel.

Command Reference

Summary of Contents for RTM20 Series




















































































































































































































































































































































































































































































































Reviews:

No comments