manualshive.com logo in svg

Rohde & Schwarz RTM20 Series, User Manual, Page: 442 / 499

Share
Download
Rohde & Schwarz RTM20 Series User Manual Download Page 442

Remote Control

R&S

®

RTM20xx

427

User Manual 1317.4726.02 ─ 01

Suffix: 

<b>

.

1..4
Selects the bus.

<n>

*
Selects the frame (1...n).

Return values: 

<FrameData>

Comma-separated list of decimal values of the data bytes.

Usage: 

Query only

BUS<b>:LIN:FRAMe<n>:STATus?

Suffix: 

<b>

.

1..4
Selects the bus.

<n>

*

Return values: 

<FrameStatus>

OK | UART | CHCKsum | PRERror | SYERror | WAKeup |
INSufficient | ERR | LENer

Usage: 

Query only

BUS<b>:LIN:FRAMe<n>:STARt?

Returns the start time of the specified frame.

Suffix: 

<b>

.

1..4
Selects the bus.

<n>

*
Selects the frame (1...n).

Return values: 

<StartTime>

Range: 

depends on sample rate, record length, and time
base

Increment:  depends on the time base
Default unit: s

Usage: 

Query only

BUS<b>:LIN:FRAMe<n>:STOP?

Returns the end time of the specified frame.

Suffix: 

<b>

.

1..4
Selects the bus.

Command Reference

Summary of Contents for RTM20 Series




















































































































































































































































































































































































































































































































Reviews:

No comments