manualshive.com logo in svg

Rohde & Schwarz RTM20 Series, User Manual, Page: 252 / 499

Share
Download
Rohde & Schwarz RTM20 Series User Manual Download Page 252

General Instrument Setup

R&S

®

RTM20xx

237

User Manual 1317.4726.02 ─ 01

Parameter ← Interface

Provides a settings dialog to configure the active additional interface. Changes are only
adopted by the instrument after you press "Save".

DHCP ← Parameter ← Interface

Activates or deactivates usage of the Dynamic Host Configuration Protocol (DHCP). If
the network supports dynamic TCP/IP configuration using DHCP, all address information
can be assigned automatically.

Next ← Parameter ← Interface

For settings that require several entries in one row, "Next" selects the next entry.

To select the next setting in the dialog, press "Down", to select the previous setting, press
"Up".

Up ← Parameter ← Interface

Selects the previous setting in the dialog.

Down ← Parameter ← Interface

Selects the next setting in the dialog.

Default ← Parameter ← Interface

Restores the default interface settings.

Save ← Parameter ← Interface

Saves the changes to the instrument and closes the dialog.

Device Information

Displays insformation on the instrument, such as its serial number, the installed software
version and hardware information. This information is required in case of a support
request.

Update

Provides functions to update the help files or firmware of the instrument or interfaces.

Firmware ← Update

Allows you to update the instrument firmware. The currently installed firmware version is
displayed, as well as all available update versions if a USB flash drive containing an
update is identified. The instrument is only updated when you press "Execute".

Note: 

You should update the instrument firmware in regular intervals to take advantage

of new functions and solve possible problems.
The online help is not included in the firmware update package. Update the online help
separately to get the latest information.

Execute ← Firmware ← Update

The instrument firmware is updated.

Reference for Setup

Summary of Contents for RTM20 Series




















































































































































































































































































































































































































































































































Reviews:

No comments