Trying Out the Instrument
R&S
®
RTE
48
Getting Started 1326.1026.02 ─ 06
4.4
Zooming into the Display
Using the SCALE rotary knobs, you can change the scaling of the time base and
signal amplitudes in order to enlarge the waveform. If you need to see more
details, use one of the zoom functions. The instrument has 4 zoom types, 2 of
them you try out in this chapter.
The usage of zooms is also shown in a short video that is available on the
instrument: "Tutorials > Getting Started > Zoom".
4.4.1
Using the Standard Zoom
1. Restore the default signal channel settings by pressing the PRESET and
AUTOSET keys.
2. On the toolbar, tap the "Zoom" icon.
3. Tap the position in the diagram that you want to define as one corner of the
zoom area. Then drag your finger to the opposite corner of the zoom area.
While you drag your finger on the touchscreen, a dotted rectangle is displayed
to indicate the current zoom area. When the rectangle covers the required
zoom area, remove your finger.
The indicated area is magnified in a new zoom diagram. The original diagram
is displayed with the zoom area indicated as a rectangle.
Zooming into the Display
