Putting into Operation
R&S
®
RT-ZS60
15
User Manual 1418.7342.02 ─ 01
2
Putting into Operation
The R&S
RT-ZS60 active voltage probe has been designed to withstand a moderate
amount of physical and electrical stress. You should treat the probe with care. It can
be damaged if excessive force is applied to the probe tip.
Exercise care to prevent the probe from receiving mechanical shock.
Always handle the probe by the probe head or probe box.
Avoid putting excessive strain on the probe cable or exposing it to sharp
bends.
Store the probe in a shock-resistant case such as the foam-lined shipping
case that came with the probe.
Voltages above the specified limits of the R&S
RT-ZS60 active voltage probe
may damage the probe tip amplifier.
Do not exceed the specified limits.
During operation, the probe slightly heats up. This is normal behavior and not a sign
of malfunction.
