Product Description
R&S
®
RT-ZS60
5
User Manual 1418.7342.02 ─ 01
1
Product Description
1.1
Key Features and Key Characteristics
The R&S
RT-ZS60 is a single-ended active voltage probe with high input impe-
dance. It allows the user to make ground-referenced voltage measurements from
DC to 6 GHz. The R&S
RT-ZS60 is optimized for single-ended measurements in
environments characterized by 50
Ω
impedance.
The comprehensive accessory set allows this probe to be connected to a wide vari-
ety of devices under test (DUT), not impairing the extremely short rise time and the
low input capacitance of the R&S
RT-ZS60. Provided with special features such as
the R&S ProbeMeter and the micro button, the R&S
RT-ZS60 is designed to meet
tomorrow's challenges in probing.
Since the probe is equipped with Rohde & Schwarz probe interface, it can be con-
nected to any Rohde & Schwarz base unit that is compatible with this interface.
When connected to the front panel of an R&S oscilloscope, the probe is controlled
via the software menus of the oscilloscope.
Using a specially developed adapter (see
chapter 1.4.2, "Optional Accessories"
on page 13), the probe can be connected to any other base unit.
1.1.1
Key Characteristics
The key characteristics of the probe are the following:
Key Features and Key Characteristics
