manualshive.com logo in svg

Rohde & Schwarz RT-ZD40, User Manual

Share
Download
Rohde & Schwarz RT-ZD40 User Manual Download Page 42

Maintenance and Service

R&S

®

RT-ZD40

42

User Manual 1410.5363.02 ─ 05

6

 

Maintenance and Service

Like all Rohde & Schwarz products, Rohde & Schwarz probes and adapters are
of high quality and require only minimum service and repair. However, if service
or calibration is needed, contact your Rohde & Schwarz service center. Return a
defective product to the Rohde & Schwarz service center for diagnosis and
exchange.

6.1

 

Cleaning

1. Clean the outside of the product using a soft cloth moistened with either distil-

led water or isopropyl alcohol. Keep in mind that the casing is not waterproof.

Note: 

Do not use cleaning agents. Solvents (thinners, acetone), acids and

bases can damage the labeling or plastic parts.

2. Dry the product completely before using it.

6.2

 

Contacting Customer Support

Technical support – where and when you need it

For quick, expert help with any Rohde

 

&

 

Schwarz equipment, contact one of our

Customer Support Centers. A team of highly qualified engineers provides tele-
phone support and works with you to find a solution to your query on any aspect
of the operation, programming or applications of Rohde

 

&

 

Schwarz equipment.

Up-to-date information and upgrades

To keep your instrument up-to-date and to be informed about new application
notes related to your instrument, please send an e-mail to the Customer Support
Center stating your instrument and your wish. We will make sure that you get the
right information.

Contacting Customer Support

Summary of Contents for RT-ZD40

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands