manualshive.com logo in svg

Rohde & Schwarz R&S ZN-Z3x, User Manual

Share
Download
Rohde & Schwarz R&S ZN-Z3x User Manual Download Page 51

ZN-Z3x User Tool

R&S

®

ZN-Z3x

51

User Manual 1177.6381.02 ─ 03

6

ZN-Z3x User Tool

The ZN-Z3x User can be found on the User Documentation CD-ROM that is ship-
ped with the R&S

 

ZN-Z30. It offers the following functions:

●

Connect to one or more Inline Calibration Controllers R&S

 

ZN-Z30 via USB

●

For each of the connected R&S

 

ZN-Z30:

– Read its identification parameters (serial number, firmware version)
– Send SCPI commands and read the responses
– Read and modify LAN Settings
– Show the number of attached Inline Calibration Units R&S

 

ZN-Z32/Z33

●

For each of the Inline Calibration Units R&S

 

ZN-Z32/Z33 attached to one of

the connected R&S

 

ZN-Z30:

– Show its serial number, firmware version and temperature
– Read the factory characterization data of the ICU from the SD card of the

ICC

– Read user characterization data from the ICU
– Write user characterization data to the ICU

●

Update the firmware of an Inline Calibration Unit R&S

 

ZN-Z30 and/or its

attached Inline Calibration Units R&S

 

ZN-Z32/Z33

6.1

Software Installation

The "ZN-Z3x User" tool can be installed on any PC running Windows 7 or higher.

In addition to the requirements imposed by the operating system (e.g. see 

Win-

dows 7 system requirements

), you will need a spare USB port to establish a

physical connection to the Inline Calibration Controller.

Installation of the software is completely self-explanatory: run the

znz3x_Setup.msi

 and follow the instructions of the installation wizard.

If not already available on the target PC, the wizard attempts to install the
R&S

 

ZN-Z USB BULK driver, which requires administrative privileges.

 

 

Software Installation

Summary of Contents for R&S ZN-Z3x































































Reviews:

No comments

Brands by name

Popular brands

Load more brands