Operation
R&S
®
ZN-Z3x
31
User Manual 1177.6381.02 ─ 03
ICC:SET:CLOCK
Sets date and time at the Inline Calibration Controller.
Note that the R&S
ZN-Z30 doesn't have a battery and hence date and time have
to be set after every power off.
Parameters:
<TimeStamp>
A timestamp in the 32 bit coded format described in the
table below.
Usage:
Event
Table 4-2: Timestamp format
Bits
Description
0–4
Seconds divided by 2 (0–30)
5–10
Minute (0–59)
11–15
Hour (0–23)
16–20
Day of month (1–31)
21–24
Month (January = 1, ..., December = 12)
25–31
Years since 1980 (= current year - 1980).
ICC:WRITE:SETTINGS
Writes the current (LAN) settings to the internal flash memory of the Inline Cali-
bration Controller. These settings are loaded during instrument startup.
Usage:
Event
Manual operation:
"Write all settings to ZN-Z30 (permanent)"
4.2.1.2
ICC – LAN Interface
The following commands get/set the LAN properties of the Inline Calibration Con-
troller R&S
ZN-Z30.
Remote Control Commands
