Overview
Overview of the Front
2-8
VENICE 2U | Hardware Guide | Version 1.2
Rohde & Schwarz DVS GmbH
2.2.2 Operation Items
With the operation items at the system’s front the hardware of
VENICE 2U can be controlled (e.g. turned on or off). There you can also
find LEDs that allow you to assess the state of the R&S DVS system and
the network connection, as well as an USB 3.0 connector.
Figure 2-4: Operation items overview
No.
Item
Explanation
1
power
LED
This LED lights up when the system has been turned
on and is now operating.
2
alarm
LED
This LED lights up when a hardware malfunction has
occurred.
It is recommended to configure the
VENICE 2U system for an automatic e-
mail notification accounting for all pos-
sible hardware malfunctions such as
power supply or fan failure. In some
cases no alarm buzzer will be sounded,
so you have to check the state of the
alarm LED at regular intervals other-
wise.
Further information about what to do
in case of a hardware failure can be
found in section “Troubleshooting” on
page A-2.
3
LAN 0
LED
This LED lights up when the network connector
LAN 0 (see section “ATX Connector Panel” on
page 2-20) is connected to a network.
4
LAN 1
LED
Same as ’LAN 0 LED’ but for LAN 1
5
LAN 2
LED
Same as ’LAN 0 LED’ but for LAN 2
7
8
10
9
1
2
3
4
5
6