Rohde & Schwarz R&S UPP, User Manual

Page: 861 / 938

Remote Control - Command Description
R&S
®
UPP
845 User Manual 1411.1055.32 ─ 10
SYSTem:CHNString <chnstring>
Parameters:
<chnstring> string
Manual operation: See "Channel Descr." on page 498
SYSTem:COMMunicate:GTL
This command switches the instrument to local operation.
SYSTem:COMMunicate:GPIB:ADDRess <address>
This command sets the IEC/IEEE bus address.
Parameters:
<address> integer
Range:
1 to 30
Example: SYST:COMM:GPIB:ADDR 14
'Sets IEC/IEEE bus address to 14
Manual operation: See "GPIB Address" on page 493
SYSTem:DISPlay:EXPLanation<n3>:SHOW <show>
This command inserts up to 10 comment windows on the display.
The comment text is entered with command
SYSTem:DISPlay:EXPLanation<n3>:TEXT
.
The windows are hidden again with command
SYSTem:DISPlay:EXPLanation<n3>:HIDE
.
Suffix:
<n3>
.
1 to 10
Index of comment window to be indicated on the display.
Parameters:
<show> string
"x=p1,y=p2,w=p3,h=p4"
p1, p2: coordinates in pixel of the upper left corner of the com-
ment window. Origin of the coordinates is the left upper corner of
the display. The y-axis is the vertical axis, the x-axis the horizon-
tal axis.
p3, p4: width and height in pixel of the comment window.
SYSTem Subsystem