Rohde & Schwarz R&S UPP, User Manual

Page: 850 / 938

Remote Control - Command Description
R&S
®
UPP
834 User Manual 1411.1055.32 ─ 10
<Length> specifies the number of subsequent bytes (34 in the example)<binary block
data> binary block data of the specified length
Example: MMEM:DATA 'TEST1.WV',#3767<binary data>
Writes the block data to file '
test1.wv
'.
MMEM:DATA? 'TEST1.WV'
transmits the data of file'
Test1.wv
' as binary block from the
R&S UPP to the controller.
MMEMory:DELete <file_name>
This command deletes the specified file.
Example: MMEM:DEL 'D:\UPV\USER\TEST1.set'
Deletes file '
Test1.set
' from directory
USER
on the internal
hard disk.
Usage: Event
MMEMory:MDIRectory <directory_name>
This command creates a new subdirectory for the specified directory. If no directory is
specified, a subdirectory of the default directory is created. A directory tree can also be
created by using this command
Example: MMEM:MDIR 'carrier'
Creates subdirectory 'carrier' in the current directory.
Usage: Event
MMEMory:MOVE
<file_source><msus_source>[,<file_destination>,<msus_destination>]
This command renames an existing file if <file_destination> does not contain a path
specification. Otherwise, the file is moved to the specified path and stored under the
original file name or under a new file name if one is specified.
You can also enter the path specification by means of an additional parameter; the
command then reads as follows:
MMEMory:MOVE
<file_source><msus_source>[,<file_destination>,
<msus_destination>]
Example: MMEM:MOVE 'test.set','keep.set'
Renames file '
test.set
' to '
keep.set
'.
MMEM:MOVE 'test.set','\user\keep.set
Moves file '
test.set
' to subdirectory '
user
' and stores it there
under the name '
keep.set
'
Usage: Event
MMEMory Subsystem