Rohde & Schwarz R&S UPP, User Manual

Page: 837 / 938

Remote Control - Command Description
R&S
®
UPP
821 User Manual 1411.1055.32 ─ 10
Min
Parameters:
<state> ONCE | EXEC
ONCE or EXEC can also be omitted.
ONCE
Sets O cursor | X Cursor to trace minimum.
EXEC
Alias to ONCE.
Example: DISPlay:SWEep4:XCURsor:SETTo:MIN
DISPlay:SWEep4:XCURsor:SETTo:MIN ONCE
DISPlay:SWEep4:XCURsor:SETTo:MIN EXEC
the three commands are equivalent.
DISPlay:FFT<n2>:OCURsor:SETTo:MRKA <state>
DISPlay:FFT<n2>:XCURsor:SETTo:MRKA <state>
DISPlay:WAVeform<n2>:OCURsor:SETTo:MRKA <state>
DISPlay:WAVeform<n2>:XCURsor:SETTo:MRKA <state>
DISPlay:SWEep<n2>:OCURsor:SETTo:MRKA <state>
DISPlay:SWEep<n2>:XCURsor:SETTo:MRKA <state>
Corresponds to softkey operation:
Cursor
Set O cursor | Set X cursor,
Marker A
Parameters:
<state> ONCE | EXEC
ONCE or EXEC can also be omitted.
ONCE
Sets O cursor | X cursor to the position of marker A
EXEC
Alias to ONCE.
Example: DISPlay:SWEep4:XCURsor:SETTo:MRKA
DISPlay:SWEep4:XCURsor:SETTo:MRKA ONCE
DISPlay:SWEep4:XCURsor:SETTo:MRKA EXEC
the three commands are equivalent.
DISPlay:FFT<n2>:OCURsor:SETTo:MRKB <state>
DISPlay:FFT<n2>:XCURsor:SETTo:MRKB <state>
DISPlay:WAVeform<n2>:OCURsor:SETTo:MRKB <state>
DISPlay:WAVeform<n2>:XCURsor:SETTo:MRKB <state>
DISPlay:SWEep<n2>:OCURsor:SETTo:MRKB <state>
DISPlay:SWEep<n2>:XCURsor:SETTo:MRKB <state>
Corresponds to softkey operation:
Softkey Commands of the Graphical Display