Rohde & Schwarz R&S UPP, User Manual

Page: 771 / 938

Remote Control - Command Description
R&S
®
UPP
755 User Manual 1411.1055.32 ─ 10
MMEMory:LOAD:FREQuency:SLCFrequency <filename>
Input of the file name for the list of band-pass / band-stop center frequencies (fre-
quency sweep list). Only available for activated bandpass / band-stop list sweep.
Parameters:
<filename> string
Manual operation: See "File Name" on page 371
SENSe[1]:BANDwidth <bandwidth>
Parameters:
<bandwidth> float
Manual operation: See "Bandwidth" on page 366
SENSe[1]:BANDwidth:MODE <mode>
Parameters:
<mode> PPCT1 | PPCT3 | PTOCt | POCT12 | PFIX | SPCT1 | SPCT3 |
STOCt | SOCT12 | SFIX | PFASt | SFASt
Manual operation: See "Bandwidth" on page 366
SENSe[1]:FREQuency <frequency>
Parameters:
<frequency> float
Manual operation: See "Freq Mode" on page 371
SENSe[1]:FREQuency:FACTor <factor>
Parameters:
<factor> float
Manual operation: See "Factor" on page 373
SENSe[1]:FREQuency:SELect <select>
Parameters:
<select> CW | FIXed | GENTrack | CH1 | CH1Freq | CH2 | CH2Freq |
AUToboth | REFFrequency
Manual operation: See "Freq Mode" on page 371
SENSe[1]:SWEep:CONTrol <control>
Parameters:
<control> OFF | ASWeep | ALISt
Level Measurements