Rohde & Schwarz R&S UPP, User Manual

Page: 600 / 938

Instrument Functions
R&S
®
UPP
584 User Manual 1411.1055.32 ─ 10
For two and multichannel instruments , the configuration panel for the Freq/Phase
measurement results in operating mode "Freq & Phase" and "Freq & Grp Del" always
features two columns.
Display
Only for two-channel instruments:
Clicking the Show button activates the combo display for a measured value.
To close it, provided it has the focus, press [CLOSE] or click the button in the title
bar.
Copy to Ch2
Only for two-channel instruments:
For two
‑
channel measurements, the "Copy to Ch2" function is available for the "Func-
tion Config," "Level Mon Config" and "Input Config" measurement result configuration
panels.
As the name says, the parameter fields from the first channel are transferred to the
second channel. This happens
once for almost all parameter fields when the Exec but-
ton is pressed.
In the Freq/Phase configuration panel, this parameter field is not available as the trans-
fer of frequency parameter fields makes no sense in the phase area.
Remote command:
SENSe<1|2|6>:CONFig:COPYother
on page 804
Combi Display