Rohde & Schwarz R&S UPP, User Manual

Page: 598 / 938

Instrument Functions
R&S
®
UPP
582 User Manual 1411.1055.32 ─ 10
measured and how measurement is performed is configured in the analyzer
panel.
The measurement result configuration panels are opened in the menu.
4 different measurement result configuration panels are available.
●
Function Config
The panel is used to configure how the measurement results for the analyzer mea-
surement function "Function" are displayed.
●
Level Mon Config
The panel is used to configure how the measurement results for the additional
measurement function "Level Monitor" are displayed.
●
Input Config
The panel is used to configure how the measurement results for the additional
measurement function "Input Peak" are displayed.
●
Freq / Phase Config
The panel is used to configure how the measurement results for the additional
measurement function "Freq/Phase" are displayed.
The illustration below shows the assignment of the analyzer measurement functions to
the measurement result configuration panels and the measurement result displays.
5.49.3 Parameter Fields of the Panel
The layout of the measurement result configuration panels is almost identical for all of
the displays. The differences are explained in the respective setting function descrip-
tion.
For two-channel instruments , channel 1 and channel 2 can be configured separately
for each measurement function. For this reason, both columns are always provided for
the Function, Level Monitor and Input Peak measurement results.
Combi Display