Rohde & Schwarz R&S UPP, User Manual

Page: 586 / 938

Instrument Functions
R&S
®
UPP
570 User Manual 1411.1055.32 ─ 10
Pressing the "Find Cursor "softkey adjusts the display window so that the data set
appears together with the cursor at the center of the display.
5: Numbering of measured values
The individual measured values are numbered consecutively from 1 to n.
6: Scan number
If a trace consists of several scans, the desired scan can be selected here by pressing
the [Next Scan ] rocker key or using the mouse. In the result list, only the values of the
selected scans are shown. The scan number shown in this display field indicates which
scan is listed.
7: Symbols indicating limit violations
"Limit Upper"
Limit Upper is activated and there is no limit violation.
"Limit Lower"
Limit Lower is activated and there is no limit violation.
"Limit Upper
past"
The "Limit Upper" value has been violated in the past but there is cur-
rently no limit violation. The violation is indicated until the [START ]
key is pressed again.
"Limit Lower
past"
The "Limit Lower" value has been violated in the past but there is cur-
rently no limit violation. The violation is indicated until the [START]
key is pressed again.
"Limit Upper
current"
The "Limit Upper" value is currently being violated.
"Limit Lower
current"
The "Limit Lower" value is currently being violated.
8: Display filter
If the result list has the focus, a softkey menu appears. Pressing the "Selection " button
opens the next softkey level where it is possible to select the measured values accord-
ing to the following criteria, i.e. to list only those rows which satisfy the selection crite-
ria:
"All ", "Lim upper ", "Lim lower ", "Lim upp&low ", "Harmonics ", "Peaks "
9: Selection frame
Used to scroll through the result list. When the selection frame reaches the top or bot-
tom of the result list, the list is scrolled below the window.
Result List