Rohde & Schwarz R&S UPP, User Manual

Page: 551 / 938

Instrument Functions
R&S
®
UPP
535 User Manual 1411.1055.32 ─ 10
Available in the graphics subsystems
Sweep, FFT, Waveform, Bar Graph
Remote command:
DISPlay:SWEep<n2>:A:BOTTom
on page 790
DISPlay:SWEep<n2>:B:BOTTom
on page 790
Main Grid
Division of the graphical display with horizontal main gridlines.
Available in the graphics subsystems
Sweep, FFT, Waveform, Bar Graph
"Off" No main gridlines are used in the graphical display.
"On" With the setting Spacing = Log:
Decadic division of a logarithmically divided y-axis with the aid of
main gridlines.
"Auto Coarse, Auto Medium, Auto Fine"
Only selectable with the setting Spacing = Lin:
Coarse, medium or fine division of a y-axis with main gridlines. One
or two, 3 or 4, 8 or 9 main gridlines are displayed depending on the
scale end values.
Main gridlines may be
hidden if the graphical window is reduced in
size.
"Divisions" Only selectable with the setting Spacing = Lin:
Preset division of a y-axis with main gridlines.
The desired number of divisions is set in the parameter field below.
These main gridlines are
not hidden if the graphical window is
reduced in size!
"Steps" Only selectable with the setting Spacing = Lin:
Preset division of a y-axis in a fixed step size.
The step size is set in the parameter field below.
These main gridlines are
not hidden if the graphical window is
reduced in size!
Division
With the setting Spacing = Lin:
Used to enter the number of main gridline divisions for a y-axis (setting Spacing = Lin)
linearly divided by main grid lines.
Curve, Spectrum and Bar Graph Display