Rohde & Schwarz R&S UPP, User Manual

Page: 518 / 938

Instrument Functions
R&S
®
UPP
502 User Manual 1411.1055.32 ─ 10
Y value on the Y1 and/or Y2 axis.
7, 16: Labeling of y-axis
Consists of the label and unit; set with
and
See Chapter 5.46.3, "Parameter Fields of the Panel" , on page 508.
8, 15: Scaling of y-axis
Automatic ( "Auto Scale ") or scaling ( "Top, Bottom ") of the y-axis to be set manually,
to be set using
See Chapter 5.46.3, "Parameter Fields of the Panel" , on page 508.
9: Cursor X-value
X value for vertical cursors.
10: Scan number
Multiscan mode:
When you use the [Next Scan ] toggle key to scroll through the scans, the current
value is entered here. Number 0 means the most recent scan. The lower the negative
number, the older the scan.
The of 4 shown in the example indicates the currently set history and informs the user
how many scans are stored in the memory or saved in the file. This value is set in the
associated DispConfig panel using
See "History" on page 511.
The entries Min and Max denote the min/max curves, provided these are switched on
and are also available in single-scan mode.
Right-clicking the arrow opens a box
Curve, Spectrum and Bar Graph Display