Rohde & Schwarz R&S UPP, User Manual

Page: 50 / 938

Startup
R&S
®
UPP
34 User Manual 1411.1055.32 ─ 10
Packaging material
It is recommended to retain the packaging. It is advisable to keep the original packing
material in order to prevent control elements and connectors from being damaged in
case the instrument is to be transported or shipped at a later date.
2.3.2 Setting Up the Instrument
The instrument is intended for indoor use. It can either be set up as a separate unit or
mounted in a 19" rack.
The following ambient conditions at the location must be ensured:
●
The ambient temperature must comply with the range specified in the data sheet.
●
All fan openings must be clear, and the airflow at the openings of the side walls
must not be impeded. The distance to the wall must be at least 10
cm.
Possible damage from electrostatic discharge
Electrical discharges can damage components of the instrument or a connected device
under test.
For this reason, the instrument may be operated only at a workplace that is protected
against electrostatic discharge.
The following methods can be used separately or in combination to protect against
electrostatic discharges:
●
Protective armband with grounding cable
●
Conductive floor covering combined with use of a heel grounder
Putting into Operation