Rohde & Schwarz R&S UPP, User Manual

Page: 47 / 938

Startup
R&S
®
UPP
31 User Manual 1411.1055.32 ─ 10
2.2.2 PC interfaces
[DVI-D]
DVI-D socket for connecting an external monitor to the instrument. It is recommended
to use a very well shielded cable with ferrite sleeves.
[LAN]
LAN interface for
●
integrating the audio analyzer in a network, e.g. for cascading several UPP instru-
ments into one measurement unit with more than 8 analog audio channels
●
Remote control of audio analyzer via remote desktop from a remote computer
●
Remote control of audio analyzer via SCPI commands from a controller
[USB]
USB 2.0 ports (Universal Serial Bus) of type A (host USB).
●
Connecting peripherals such as mouse, keyboard, printer
●
Connecting a mass storage device such as a USB stick for transferring files
There are additional USB interfaces on the front of the instrument.
2.2.3 Cascading Connections
The use of a double-shielded BNC cable is recommended as connecting cable,
whether for cascading devices or connecting a device under test.
[CLOCK IN]
Required for cascading and must be connected with CLOCK OUT of the previous
instrument
[CLOCK OUT]
Required for cascading and must be connected with CLOCK IN of the next instrument
[TRIGGER IN]
This connector is required for cascading and must be connected with TRIGGER OUT
of the previous instrument
Description of the Rear Panel