Instrument Functions
R&S
®
UPP
431
User Manual 1411.1055.32 ─ 10
Waveform
Used to activate the waveform monitor; the
graphic
is configured and displayed in the
Waveform ("Config") configuration and graphical window.
Click the "Show" button to open the Waveform graphic. As with any other window, the
graphic can be closed by clicking the title bar button , provided it is the active win-
dow.
"deactivated"
Waveform monitor deactivated
Recommended for increasing the measurement speed (e.g. for
sweeps or remote control).
"activated"
Waveform monitor activated; the parameter fields shown above
appear.
Remote command:
ON | OFF
Meas Mode
Used to select the operating mode.
"Standard"
Uncompressed recording of all samples. A maximum of 480000 sam-
ples can be stored. The possible recording length depends only on
the bandwidth (analog) or sampling rate (digital); at a sampling rate of
48
kHz or an analog bandwidth of 22
kHz, the recording length is, for
example, 10
s.
Recommended for short recordings (maximum of a few seconds) and
for periodic signals.
Analysis in the Time Domain
Summary of Contents for R&S UPP
Page 1: ...R S UPP Audio Analyzer User Manual User Manual Version 10 1411105532 ÅP ...
Page 34: ...Contents R S UPP 18 User Manual 1411 1055 32 10 ...
Page 630: ...Instrument Functions R S UPP 614 User Manual 1411 1055 32 10 Format ...
Page 631: ...Instrument Functions R S UPP 615 User Manual 1411 1055 32 10 Format ...
