Rohde & Schwarz R&S UPP, User Manual

Page: 35 / 938

Introduction
R&S
®
UPP
19 User Manual 1411.1055.32 ─ 10
1 Introduction
High measurement speed, parallel signal processing in multichannel applications, and
high reliability in continuous operation are vital requirements to be met by audio ana-
lyzers for use in production. If a cost-efficient instrument for system use is what you
need, the solution is the R&S UPP audio analyzer.
1.1 Key Features
●
Suitable for all interfaces: analog, digital and combined
●
Parallel measurements on up to eight channels
●
Up to 80 kHz bandwidth and 200 kHz sampling rate
●
Powerful and fast
●
All test signals and measurement functions in a single box
1.2 For Your Safety
The R&S UPP is designated for use in industrial, administrative and laboratory environ-
ments. Use the R&S UPP only for its designated purpose. Observe the operating con-
ditions and performance limits stated in the data sheet.
The product documentation helps you to use the R&S UPP safely and efficiently. Keep
the product documentation in a safe place and pass it on to the subsequent users.
Safety information is part of the product documentation. It warns you about the poten-
tial dangers and gives instructions how to prevent personal injury or damage caused
by dangerous situations. Safety information is provided as follows:
●
In the "Basic Safety Instructions", safety issues are grouped according to subjects.
For example, one subject is electrical safety. The "Basic Safety Instructions" are
delivered with the R&S UPP in different languages in print.
●
Throughout the documentation, safety instructions are provided when you need to
take care during setup or operation. Always read the safety instructions carefully.
Make sure to comply fully with them. Do not take risks and do not underestimate
the potential danger of small details such as a damaged power cable.
1.3 Documentation Overview
This section provides an overview of the R&S UPP user documentation and on how to
access it.
Included in delivery
●
Getting started and basic safety instructions
Documentation Overview