Rohde & Schwarz R&S UPP, User Manual

Page: 243 / 938

Instrument Functions
R&S
®
UPP
227 User Manual 1411.1055.32 ─ 10
"PCM 8Ch Lay
1" 8-channel PCM data. In addition to the 2-channel settings, the "Chan-
nel" parameter field underneath it also offers the "Multi" option which
enables the open configuration of up to 8 channels.
"Dolby Digital" Playing a Dolby Digital audio file. The available generator functions
are limited to the "Play" selection.
"Dolby Dig
Plus" Playing a Dolby Digital Plus audio file. The available generator func-
tions are limited to the "Play" selection.
Remote command:
SOURce:HDMI:AUDio:FORMat
on page 695
Channel
Selection of the active generator channels for internally generated PCM formats. The
channel selection is not offered for the generation of encoded audio formats.
"OFF" All channels are switched off.
The frequency and level setting of the channels have no effect.
Zero samples are being generated.
"1" Only the left channel supplies the generator signal; the right channel
is deactivated (all bits = null).
"2" Only the right channel supplies the generator signal; the left channel
is deactivated (all bits = null).
"2 = 1" Left and right channel furnish the same output signal.
"Multi" The option can be selected only if "PCM 8Ch Lay 1" is selected in the
parameter field above and it allows the open configuration of up to 8
channels in the following parameter fields.
Remote command:
OUTPut:CHANnel
on page 690
Gen Channels
Setting of the respective active generator channel for the audio format "PCM 8Ch
Lay1" with the "Multi" channel setting.
Remote command:
OUTPut:MCHannels<n2>
on page 693
Sync To
Determines the source of the master clock used for the audio signal generation.
Configure HDMI Generator